X Message site
(The message will disappear after 2 seconds)
7 pagesV123456>
Reply
>OnePlus One - Sailfish OS
bikeza
Message#1
07.04.15, 11:54
Veteran
********
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 1521
Date: 09.11.09
OnePlus One

Reputation:-140+

OnePlus One - Sailfish OS
Posted imageOne, A0001, Bacon
Description | SailFish talk | Discussion of OnePlus One | Official firmware | Unofficial firmware and custom kernel | Sailfish OS | Ubuntu Touch | FAQ on OnePlus One | Purchase | accessories | Marriage

ONLY FOR TESTING! NOT INTENDED FOR EVERYDAY USE!

Any actions for flashing, replacing cores, modems and other manipulations associated with changing the software part of the smartphone from Recovery should be performed with a charge of more than 50%. Otherwise, a deep discharge of the battery may occur and it will only be possible to charge it after removing the back cover (as describedhere)


Working / Does not work
For Sailfish OS 2.0.0.10
Works exactly
  • Display
  • touchscreen
  • Audio
  • Bluetooth
  • SMS
  • Voice connection
  • Mobile Internet
  • WLAN
  • Sensors
  • Volume buttons
  • Power button
  • Vibration
  • Tactile response
  • Charging
  • USB Storage


Does not work
  • LED indicator
  • OTA update
  • Android app support


Unknown
  • NFC
  • RTC alarms


Works but not connected
  • GPS
  • Camera


For Sailfish OS 1.1.1.27 (alpha 1/2)
Working
  • Display
  • touchscreen
  • Audio
  • Bluetooth
  • SMS
  • Voice connection
  • Mobile Internet
  • WLAN
  • Sensors
  • Volume buttons
  • Power button
  • Vibration
  • Tactile response
  • Charging
  • USB Storage


Does not work
  • LED indicator
  • GPS
  • Camera
  • Android app support
  • OTA update


Known issues and solutions


Helpful information
Instructions
Download
Screenshots
Changelog
Alpha1 - March 20, 2015
  • Initial release

Alpha2 - March 29, 2015
  • WLAN fixed up - vgrade / yacuken

SailfishOS 2.0 build - 16 Jan 2016



K
Topic with no curator. For filling caps please contact the moderators section through a buttonPicturea message that you need to add links.


Post has been editeddem0na - 30.11.16, 12:40
Reason for editing: Sailfish OS 2.0.4.13 + CM 12.1
bikeza
Message#2
07.04.15, 12:57
Veteran
********
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 1521
Date: 09.11.09
OnePlus One

Reputation:-140+

Instructions for installing Sailfish OS for novice users
general information
  • To open a command prompt, you need to: press a keyboard shortcutWIN + R, Entercmdand pressEnter
  • To enter thefastbootYou must: turn off the phone. Hold buttonsVolume up + Power buttonUntil the screen appearsfastboot
  • To enter therecoveryYou must: turn off the phone. Hold buttonsDown Volume + Power ButtonUntil you feel the vibration. Release the buttons and wait for the downloadrecovery
  • Backup - Unlocking the bootloader will completely erase all data from your device including applications, settings and even the contents of the internal memory. Copy all the important files from phone to computer
  • To install the driver (for Windows users), you must: Download and install the driverSetup.exe UniversalAdbDriverSetup.msiFrom the topic's head (Download section)
to installSailfish OS, You must have an unlocked bootloader and a custom recovery. It is not recommended to useSailfish OSAs the main system, so we recommend that you flash it as a second system usingMultiROM Manager. This manual consists of 4 parts. You can go to any part if you have already done the previous ones.
1. Installing the SDK
2. Unlocking the bootloader and installing custom recovery + right of ROOT
3. Installation of MultiROM Manager
4. Installing Sailfish OS
1. Installing the SDK
downloadAndroidSDKSlim.zipFrom the topic's header (Download section), extract the contents of the archive to the root directory of the disk:/. To make sure that everything works, open the command window and type the following commands:
Cd From: / android-sdk / platform-tools

Adb version

If the command line returns
Android Debug Bridge version x.x.xx
, Then everything works. If it produces an error
Adb is not a recognized command
, Then it is set with an error. Carefully repeat the above steps. Close the Command Prompt window when everything is ready.
2. Unlocking the bootloader and installing custom Recovery + ROOT rights
Switch off the phone. Then load it into thefastboot. Connect the phone to the BB using a USB cable, open a command prompt and type:
Cd From: / android-sdk / platform-tools

fastboot devices

This command displays the list of connected devices. If the serial number of your device is displayed, then you can continue. If your phone is not listed, then your drivers are not installed correctly. In order to continue you need to fix your drivers so that your phone is on the list of fastboot devices.
After your device was found to enter the following code (remember that after that all data will be deleted from your device)
fastboot oem unlock

After the command has completed execution, type
fastboot reboot

The phone will reboot. Wait for the phone to fully boot. Then configure the following settings in your phone settings:
1. USB debugging:Go toSettings> About phone>Click on Assembly Number 7 times. This will open the developer mode. Now back toSettings> For Developers> Debugging> Debug Mode (Enable Android Debuf Interface = g Bridge (ADB))> Check
2. Disable bootloader recovery:On your phone, go toSettings> For Developers> Update recovery mode (Overwrite Recovery partition when installing updates)> Uncheck.
Next you need to downloadTWRP RecoveryAnd put along the wayFrom: / android-sdk / platform-tools. DownloadSuperSU.zipAnd copy it to the internal memory of the phone. Switch off the phone. Then, load your phone infastbootAnd connect it to the BB. Open a new command window and run the following commands:
Cd From: / android-sdk-windows / platform-tools

Fastboot flash recovery twrp-2.8.7.0-bacon-20160111.img

After the installation is complete, turn off the phone and boot into therecovery. Now selectInstalAnd selectSuperSU.zipWhere you saved it in the phone memory. Swipe to confirm the setting. Restart the phone. You should see the new applicationSuperSUIn installed applications. Now you haveThe right of ROOT(They are extremely necessary for working with MultiROM Manager).
3. Installation of MultiROM Manager
For installationMultiROM ManagerYou need to download and install it from the official storeGoogle PlayOr from the corresponding section of the forum®MultiROM Manager.
  1. Open the installed applicationMultiROM Manager(Grant access to rightsSuperuser (ROOT))
  2. You should see and select three check marks (1. Install the latest version of MultiROM (if you do not have the latest one), 2. Custom Recovery (required), 3. Kernel and select the version of the current system (4.4.x, 5.0.x or 6.0.x )) And press the buttonestablish. After downloading the components, the program will prompt you to reboot the device for installation. Agree
  3. After the installation is finished, the phone will reboot and you will see a new menu asking you to choose which system to load.
4. Installing Sailfish OS
  1. downloadCyanogen Mod 12.1 snapshot(orCyanogen Mod 11For the alpha version) andSailfishOS 2.0.0.10(orSailfish OS Alpha 2 / Sailfish OS Alpha 1For the thrill of the alpha version) from the topic head (sectionDownload) And load them into the phone's internal memory
  2. Turn off the phone and go to therecovery
  3. Next on itemsAdvanced> MultiROM> Add ROM> Select Sailfish OS, Click Next
  4. By the buttonCyanognMod ZIP fileSelect previously downloadedCyanogen Mod 12.1 snapshot(orCyanogen Mod 11For the alpha version). By the buttonRootfs ZIP fileSelect previously downloadedSailfishOS 2.0.0.10(orSailfish OS Alpha 2 / Sailfish OS Alpha 1For the thrill of the alpha version) and clickInstal
  5. After the installation is complete, restart the device. You will see a menu asking you to select the system you are downloading.

If as the main operating system you had the firmware based on Android 5.0.x, then everything will be fine, if on Android 6.0.x it will not load, since at the moment Multirom does not yet have an official kernel for 6.0.x with support Kexet-hardboot. Can only be used in conjunction with Cyanogen OS 13, installation instructions under the following spoiler The problem is solved by the release of the new version of MultiROM Manager! All firmware versions are supported!
Original instructions on the OnePlus forum
Installation instructions for Sailfish OS next to Cyanogen OS 13(Irrelevant instruction)
  1. Download kernel Tyr Kernel forTyrV150orTyrV1-CM13(The last works through time)
  2. From under the system inMultirom ManagerInstall custom Recovery
  3. Boot into Recovery
  4. Install Sailfish OS as described above.
  5. There we install the kernel from RecoveryTyrV150 orTyrV1-CM13With a tickInject MultiROM after installation
  6. After installing the kernel, we immediately press the buttonMultirom Inject curr.boot sector, We doSwipe, Back reboot system
  7. The phone turns on and the system selects the bootable system.
On the TyrV150 coresAnd TyrV1-CM13Both systems work, and CM13 (I have the latest nightie) and Sailfish OS 2.0.0.10! Running a minor operating system can be performed from the MultiROM Manager application, or when the phone is rebooted!
This method is only for Cyanogen OS 13 firmware! On other firmware this method may not work! CyanogenMod 13.0 JGCAAP BuildsDoes not work for sure! Running will be possible only with a permanent kernel replacement from Recovery.If you haveCyanogenMod 13.0 JGCAAP Builds, Then you can use the kernelBoeffla(I used beta2) fromthis post. But running Sailfish OS only from under the main system from the MultiROM Manager application
Installation instructions for Sailfish OS for advanced users
  1. Download and install MultiROM
  2. Download the latest Sailfish OS build
  3. Download assembly CyanogenMod
  4. Reboot in Recovery
  5. Go to Advanced> MultiROM> Add ROM
  6. Select Sailfish OS
  7. Select Cyanogen rootfs and Sailfish
  8. Install
Instructions for upgrading Sailfish OS for advanced users
  1. Download the latest Sailfish OS build
  2. Reboot in Recovery
  3. Open Advanced> MultiROM> List ROMs
  4. Select your SailfishOS
  5. Select "Flash a Zip"
  6. Select the downloaded Sailfish OS archive
  7. Install
How to use Sailfish OS
Basic setting
After installation, complete all necessary actions on the phone to the end. Finish getting acquainted with the device and go directly to the setting itself!
Instructions for working in the application "Terminal"
If you have never worked with a terminal, the following tips may be useful to you
  • You can use autocomplete commands, paths and file names by pressing the tab key
  • You can see the commands entered earlier, edit them using the up and down arrow keys (the up / down arrow shows you the story, the left / right arrows allow you to go to the command to fix something)
  • You can change the font size in the menu (it is called by pressing on 3 bars in the upper right corner of the terminal)
Installation instructions for SSH connection
Why do we need this?
Dialing long commands in the terminal on the phone is very inconvenient and labor-intensive. Therefore, we are looking for an easy way - we use our computer to enter commands.
  1. Go to "Settings" - "Developer mode" - enter your password in the "Set password for SSH ..." - click "Save"
  2. You will see the IP address below, in the developer settings:
    • For dudes on Linux or OS X - just open your terminal
    • For Windows users, you might need to look awayPuTTY
  3. Next, enter in the terminal "ssh nemo @ your IP" and then, your password is set higher (the default username is nemo)
Mobile data
To configure mobile data on your smartphone when installing Sailfish OS, follow these steps:
  1. Open the Settings app
  2. Click on the "Cellular network" tab
    • Can not find the option "Cellular network"? Go to the "Terminal" application and run the following code:
      Devel-su dconf reset / apps / jolla-settings / maskedSettings

  3. Click the "Internet" tab
    • If there is no connection, you need to configure the network manually. Hold the "Internet" tab and then select "Settings"
    • Find the settings of your supplier company in Google. Words to search: APN settings
    • Enter the name of the access point and add the user name and password if required.

  4. Now turn on the "Terminal" application and enter the following text:
    Devel-su systemctl restart statefs
Installing Warehouse
  1. Go to "Settings"
  2. Select "Unapproved programs".
  3. Check the "Allow third-party software installation" check box. Confirm.
  4. Go to the main settings page.
  5. Go to developer mode
  6. Generate or enter a password. Remember it.
  7. Go to the siteHttps://openrepos.net/content/basil/warehouse-sailfishos
  8. Download the latest version of the program in the format rpm (currently harbor-warehouse-0.3-30.armv7hl.rpm)
  9. Open the Terminal application and follow these steps:
    Ssu dr store && ssu dr adaptation0

    Devel-su pkcon refresh

    After entering the command, enter the password and confirm.
  10. To install RPM, use the command:
    Devel-su pkcon install-local Downloads / harbor-warehouse-0.3-30.armv7hl.rpm

    (It is not necessary to enter harbou -..., just type the first letter and press Tab (see the "Terminal" operating instructions))
  11. Enter the password created in step five. (You will not see the password you enter, and it's not an error.)
  12. Confirm the processing of changes
Install recommended apps
  1. Select the "Terminal" tab
  2. Enter the command
    devel-su

    And press enter. This will give the "Terminal" root-rights.
  3. enter password
  4. Set the set using "pkcon install ". Review the list of recommended applications. Install them using the command:
    Pkcon install jolla-calculator jolla-calendar jolla-email sailfish-weather jolla-mediaplayer jolla-notes sailfish-office

    You can install the entire list of applications, or you can select the ones you need
Activation of T9
  1. To prompt words when typing, start the terminal
  2. Enter the command
    devel-su
    And press Enter to obtain the superuser rights
  3. Enter Developer Password
  4. Enter the command
    Pkcon install jolla-xt9 jolla-xt9-cp
    and press Enter
Installing the OnePlus One Never Settle theme
  1. Go to Settings
  2. Select Unapproved Programs
  3. Make sure it is activated. If necessary, accept the terms of the agreement
  4. Open the Browser and go to the following link:
    Https://github.com/kra...eplus/tree/master/RPMS
  5. Download the rpm file with the name: harbor-ambience-oneplus-0.1.2-0.3.noarch.rpm
  6. After the download is complete, you will receive a notification. Click on it and the Transfers panel opens.
  7. Click on the downloaded file and click "Install".
    • In case of failure, go to the "Terminal" application and type:
      Devel-su pkcon install-local Downloads / harbor-ambience-oneplusone-0.1.2-0.3.noarch.rpm

    • enter password
    • Confirm that you want to install the harbor-ambience-oneplus (if there is a query)

  8. To select a background, go to "Settings"
  9. Select "Atmospheres"
  10. At the end of the list should appear the theme "Never Settle"
Connecting a OnePlusOne smartphone to a computer when using MTP
Let's assume that you want to add music or video to your smartphone when installing Sailfish OS. But when you connect to a computer, you notice that the A0001 does not open. Follow these steps to activate Media Transfer Protocol:
  1. Go to Settings
  2. Select USB from the list
  3. Change the 'Default USB' mode to connect to the computer
    • There are more options, so you can choose "Always" if you change these modes many times
    • Use the developer mode for SSH in Sailfish OS using the IP address 192.168.2.15

  4. After changing the settings, connect the device to the computer and start copying
Transferring files when using SFTP from the computer to the device and vice versa
To transfer files using a wireless connection, you can use SFTP. Make sure that you set the developer password, and you install the SFTP client on the computer. For example: FileZilla.
On the screens that you will see here, ForkLift is used as a substitute for the search in OS X.
  1. Open the IP address of the smartphone OnePlusOne. This address can be found in the settings as developer
  2. Open SFTP on your computer and look for the "Connection" button
  3. Enter the IP address found in Step 1 as a remote server, use the user name and password from the "developer tools" in the settings. Make sure you are using SFTP and Port 22
  4. Click "Connect" and you will see the main internal category on your device
  5. Now you can download any files

The speed of downloading music files was 6 megabytes per second, so for me, at any rate, it's much faster than MTP
Installation instructions for audio codecs and libraries needed for playback
Obsolete instructions
Enter the following commands in the "Terminal" application in order:
devel-su
Enter the password created in the developer settings
Pkcon install gstreamer1.0-libav
Cd / home / nemo / Downloads
Curl https://openrepos.net/sites/default/files/packages/945/gst-plugins-bad-extra-1.4.5-1.armv7hl.rpm> gst-plugins-bad-extra.rpm
Pkcon install-local gst-plugins-bad-extra.rpm
You can start playing music through the media player (you may need to restart the player)
  1. Open the application search inWarehouse
  2. We enter into the search barFaad2
  3. First we install the first application in the listFaad2
  4. Install the second application in the listGStreamer 1.x bad extra codecs (1.4.5)
  5. Now enter the heap into the search barCodec
  6. InstallUltimate Codec Support(Will constantly pop up a notice that Warehouse does not respond - do not touch anything, humbly wait for the installation to finish)
  7. We are happy! Audio codecs installed!
The same, only through the terminal
Ssu addrepo sailfish_lib http://sailfish.openrepos.net/sailfish_lib/personal/main
Ssu updaterepo
Pkcon refresh sailfish_lib
Pkcon install faad2 faad2-devel
Pkcon install gst-plugins-ugly gst-plugins-bad-extra gstreamer0.10-ffmpeg-extra
Codes for installing all libraries from the repository saolfifh_lib
Pkcon install a52dec-devel
Pkcon install faad2
Pkcon install faad2-devel
Pkcon install gst-plugins-ugly
Pkcon install gst-plugins-bad-extra
Pkcon install gstreamer0.10-ffmpeg-extra
Pkcon install libdca
Pkcon install libdca-devel
Pkcon install libvpx
Pkcon install libvpx-devel
Pkcon install opus
Pkcon install opus-devel
Pkcon install mutagen
Pkcon install python-sip
Pkcon install python-sip-devel
Pkcon install sip
Pkcon install sip-devel

Do not put / swear
Pkcon install a52dec
Pkcon install python-gstreamer
Pkcon install python-pyqt
Pkcon install pyqt
How do I turn on the sound in headphones?
For some reason, the sound in the headphones sometimes disappears after the system is rebooted, so this action will have to be repeated after each Sailfish OS activation!
Open the Terminal application and follow these steps:
devel-su

Enter the password created in the developer settings
Systemctl restart ohmd.service

K
All instructions are up-to-date, tested and 100% workable! If you have any problems, please contact for help with a detailed description of the errors!

K
For editing or completing instructions, please contactQMS


Post has been editedbikeza - 26.02.16, 06:00
Reason for editing: The instruction has been corrected and supplemented
Beta255
Message#3
08.04.15, 15:38
Local
*****
[Online]

Group:Friends w3bsit3-dns.com
Posts: 188
Date: 26.11.12
OnePlus One

Reputation:-1+

Video review is there any chance ??
Antoxxa76
Message#4
08.04.15, 17:15
Local
*****
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 154
Date: 07.08.12
OnePlus One

Reputation:-12+

And can I use 11S as the main firmware?
Dahenur Eromart
Message#5
08.04.15, 18:33
Local
*****
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 364
Date: 24.08.11
OnePlus Two

Reputation:-49+

Without MultiROM will it start?
bikeza
Message#6
08.04.15, 23:41
Veteran
********
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 1521
Date: 09.11.09
OnePlus One

Reputation:-140+

Antoxxa76 @ 08/04/2015, 18:15*
And can I use 11S as the main firmware?
As a basic firmware, you can use any firmware, including CM11S

Posted on 04/08/2015, 23:38:

Beta255 @ 08.04.2015, 16:38*
Video review is there any chance ??
Look in the topic header

Posted on 04/08/2015, 23:41:

Dahenur Eromart @ 08/04/2015, 19:33*
Without MultiROM will it start?
Purely theoretically it can be! But I have not tried and do not advise you! And remember - everything that you do - you do at your own peril and risk!

Post has been editedbikeza - 31.01.16, 07:36
Doctor-E
Message#7
09.04.15, 03:09
Wastelander
*******
[Online]

Group:Friends w3bsit3-dns.com
Posts: 906
Date: 01.06.08
OnePlus 3T

Reputation:-62+

Very quickly it is ported, by the way. As soon as there is a fully working build, I'll go one hundred percent to it, tried it and liked it very much. And since there will also be support for Android applications - it will generally be a bomb
bikeza
Message#8
09.04.15, 04:27
Veteran
********
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 1521
Date: 09.11.09
OnePlus One

Reputation:-140+

Doctor-E 09.04.2015, 04:09*
And since there will also be support for Android applications - it will generally be a bomb

I will deal with the system fixes, there it may be possible to launch application support! We will wait for at least the first beta
Pandafyria
Message#9
09.04.15, 14:29
Ev∞
*******
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 757
Date: 14/11/12
Apple iPhone 7 Plus

Reputation:-90+

In the hat would addHttps: //wiki.merprojec.../Adaptations/libhybris
The fact that sailfish is cool, no doubt. I used it on the mako. But without android applications, it is unrealistic. In warehous little that is. There are analogues of course many applications. But it's not that.
Remembering the story with the same mako, here development is faster. There are hopes that there will be a fully working build) we wait)


--------------------
Coolio - Gangsta's Paradise - You're already 20 ... And you're also beautiful
Dahenur Eromart
Message#10
09.04.15, 19:32
Local
*****
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 364
Date: 24.08.11
OnePlus Two

Reputation:-49+

Something she did not go for me, neither that, nor so ...

Post has been editedbikeza - 31.01.16, 07:38
bikeza
Message#11
11.04.15, 01:50
Veteran
********
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 1521
Date: 09.11.09
OnePlus One

Reputation:-140+

Dahenur Eromart @ 04/09/2015, 20:32*
Something she did not go for me, neither that, nor so ...

What step did the problem arise?

Post has been editedbikeza - 31.01.16, 07:40
Dahenur Eromart
Message#12
11.04.15, 05:36
Local
*****
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 364
Date: 24.08.11
OnePlus Two

Reputation:-49+

What step did the problem arise?

On the last, loading the body ... Eternal logo ...

Post has been editedDahenur Eromart - 11.04.15, 05:37
Knikita5
Message#13
11.04.15, 05:53
Local
*****
[Online]

Group:Friends w3bsit3-dns.com
Posts: 153
Date: 15.06.12
OnePlus One

Reputation:-15+

* Dahenur Eromart,
I had this before, on the first version, which can not be put together with cm12.
What version of the cap are you betting? On the second all is normal.
bikeza
Message#14
11.04.15, 06:27
Veteran
********
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 1521
Date: 09.11.09
OnePlus One

Reputation:-140+

On the second all is normal.

I confirm! I'm using it now! Works and cellular, and mobile Internet, and Wi-Fi

Post has been editedbikeza - 01.02.16, 05:05
Knikita5
Message#15
11.04.15, 06:44
Local
*****
[Online]

Group:Friends w3bsit3-dns.com
Posts: 153
Date: 15.06.12
OnePlus One

Reputation:-15+

* Bikeza,In the sense of being normally put together with cm12. There used to be a boot-up
Dahenur Eromart
Message#16
11.04.15, 09:19
Local
*****
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 364
Date: 24.08.11
OnePlus Two

Reputation:-49+

There is Color, restore the old backup cm12, put a multitrack, .. and then follow the instructions. As a result, the main CM12 is loaded, but there is no Sailfish. I put the 2-nd version
Platon22111
Message#17
11.04.15, 15:02
Visitor
**
[Offline]

Group:users Online
Posts: 26
Date: 26.02.12
Philips Xenium W732

Reputation:-0+

The same problem, can only cm 11 with it normally works
Dahenur Eromart
Message#18
11.04.15, 15:18
Local
*****
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 364
Date: 24.08.11
OnePlus Two

Reputation:-49+

Installed ...
But now there are problems with the network, do not call, do not write ...
Jolla's accout does not see IMEI, because of this it can not add ...
The file manager does not work ...

Post has been editedDahenur Eromart - 11.04.15, 15:36
Knikita5
Message#19
11.04.15, 15:42
Local
*****
[Online]

Group:Friends w3bsit3-dns.com
Posts: 153
Date: 15.06.12
OnePlus One

Reputation:-15+

Dahenur Eromart @ 04/11/2015, 18:18*
File manager does not work

As an option there is a terminal. But it's too inconvenient to type on it.
Dahenur Eromart @ 04/11/2015, 18:18*
Jolla's accout does not see IMEI, because of this it can not add ...

I can not connect to an existing account. The creation of a new one for some reason has gone.
sstuzzi
Message#20
14.04.15, 00:24
Four-stringed samurai
******
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 608
Date: 11.12.10
Apple iPhone 7

Reputation:-69+

I'll wait for the third build, it's promised to include all the fixes. And in general, everything is very good, from the first alpha I follow the topic at the office. Forum :)


--------------------
Nokia 3310> Sony Ericsson Xperia Z1> Sony Ericsson Xperia X1> iPhone 5S> OnePlus One 64GB> iPhone 7
sirop4ik
Message#21
14.04.15, 19:12
Guru
*********
[Offline]

Group:Friends w3bsit3-dns.com
Posts: 3418
Date: 12/12/10
Xiaomi Mi 5 Pro

Reputation:-664+

With the first alpha follow the topic at the office. Forum :)

Similarly. As soon as the support is introduced for android, attach immediately. I'm certainly for native applications, but so far the software will not need to use the familiar


--------------------

7 pagesV123456>


mobile versionNow: 9 hours ago